The new range of AcoustiPack™ sound-proofing kits has been designed with our customer's pockets and greater flexibility in mind! As a result, we have introduced AcoustiPack™ EXTRA Sheet (7mm), which is a single large sheet of our latest generation 3-layer acoustic material (the same material found in Acoustipack Ultimate). This sheet is ideal if additional materials are required for a particular project, and the space allows for a 7mm sheet to be added. This product makes our range of acoustic material kits more flexible, and can help to save money and waste when an entire kit, such as Ultimate or Lite is not necessary.
AcoustiPack™ EXTRA Sheet (7mm) is a 3-layer acoustic material. Comparative small and large scale acoustic tests with alternative single-layer PC sound-proofing materials demonstrate that AcoustiPack™ multi-layer materials are more effective and safer, whilst still remaining as thin as possible.
In the latest generation of 3-layer composite (Patent Pending), the dense acoustic barrier layer has been 'suspended' away from the substrate in the centre of the acoustic foam. The construction layering is like this: (noise source) acoustic foam → acoustic barrier → acoustic foam (then the substrate, which is usually a metal sheet panel).
Sound energy first hits the upper foam surface, which is similar to the 2-layer construction, in that it is a low-reflective soundproofing material that is particularly effective at absorbing high frequencies. The sound energy then encounters the central suspended barrier layer, which is decoupled from the substrate. This high-density high-mass layer acts as an acoustic barrier mass to the transmission of energy through the material. The 3rd layer of foam acts to suspend the barrier layer a small distance away from the substrate. We have found from both small scale impedance tube and larger scale reverberation chamber acoustic tests that the 'suspended' central acoustic barrier effectively increases the absorbtion of low frequency noise (>1kHz). This may well be a result of the ′mass-spring effect′, where low frequency energy is absorbed by the sound ′moving′ the layer when it is excited by certain resonant frequencies.
The AcoustiPack™ product range have been designed to be shipped to the end-customer without the need for extra packaging. The individual product packaging is not printed on one side, and is strong enough to withstand normal handling during transit. The cardboard has a min recycled content of 35%.
A computer case can be fitted from start to finish within about 30-45 minutes depending on the complexity of the case. Fitting recommendations are supplied in the User Instructions with the pack.
You may also like to consider adding AcoustiPack™ EXTRA Foam Blocks (APExtB) to this product. This will increase the internal surface area of the acoustic materials, and help to absorb extra acoustic energy inside the PC or server case.
