DiskTwin stops hard drive vibration noise maximizes hard disk cooling

The Nexus DiskTwin is an ideal solution to get rid of any hard disk drive vibration noise and resonance at a reasonable price. The disk twin alleviates hard disk seek and vibration noises. The DiskTwin is made of two pieces of solid aluminum to augment the cooling capacity of your hard disk, plus, each piece is equipped with two high quality solid rubber absorber blocks. Just remove the hard disk from your computer and mount the DiskTwin on both sides of your 3.5" hard disk. Then, remount the complete unit in a free 5.25" drive bay.

Medical application

The Nexus DiskTwin is also suitable for medical equipment that requires mounting of a hard disk drive without earthing. The DiskTwin allows you to mount the hard disk drive without any direct contact with the chassis.
 

DiskTwin Specifications
Model	DTW-2300B
Weight	105 grams (per unit)
Dimensions	146.81x26.15x18.8 mm
Materials	Solid aluminum Solid rubber Thermal pad Mounting screws
Warranty	3 Years

 

DiskTwin Installation Instructions

1. Clean the two surfaces of the hard disk to which the DiskTwin is to be mounted, removing any dust and oil.
2. Mount the DiskTwin onto the hard disk sides by using the supplied (14mm) screws. Push the screws through the rubber block into the mounting holes of the hard disk and tighten the screws.
3. Mount the hard disk with DiskTwin into a 5.25" drive bay in your system using the supplied (7.5mm) screws.
4. (Re-)fix the connectors to your hard disk.