CNPS10X Quiet

CPU Cooler with Low Noise High Capacity 120mm Fan for low noise maximized cooling performance.

CPUs Supported

Pentium 4, Celeron D, Pentium D, Core 2 Duo, Core 2 Quad, Core 2 Extreme, Pentium Dual-Core, Core i7, Sempron, Athlon 64, Athlon 64 FX, Opteron, Dual-Core Opteron, Phenom, Athlon 64 X2 Dual-Core, Phenom II
 

FHS Specifications
Dimensions	135(L) X 100(W) X 160(H)mm
Weight	750g
Base Material	Pure Aluminum and Pure Copper
Dissipation Area	6,817 cm2
Heatpipes	5 x U-shaped heatpipes

 

Fan Specifications
Bearing Type	2 Ball-Bearing
Speed	700 ~ 1400 rpm ± 10% (FAN MATE 2 connected)
Noise Level	Not Measurable ~ 26 dBA ± 10% (FAN MATE 2 connected)
Input Voltage	12V

 

Fan Speed Controller Specifications
Dimensions	70(L) x 26(W) x 26(H) mm
Weight	20g
Output Voltage	5V ~ 11V ± 2%
Allowable Power	6W or lower
Connector	3-Pin

 

Thermal Grease Specifications
Color	Gray
Capacity	3.5g
Specific Gravity @23°C	2.88
Thermal Resistance	8mm2 K/W
Thermal Conductivity	4.1W/mK
Temperature Stability	-40°C ~ +150°C (-40°F ~ +302°F)

 

Designed for Quiet Operation The heatsink is optimized for high performance during quiet operation, incorporating a switching noise eliminated high capacity 120mm fan for intensified cooling performance and minimized noise. ‘Switching Noise’ is the high frequency harmonic noise that can result from voltage regulation.

Powerful Cooling Performance Optimally designed aluminum fins disperse heat away from the CPU via 5 heatpipes, while the high capacity 120mm fan quickly cools the heatsink for stable operation of high performance CPUs. Fast & effective cooling for up to a maximum of 340W of heat.

Adjustable Fan Speed Controller FAN MATE 2, an adjustable fan speed controller, is included for performance and noise level setting according to user preferences. FAN MATE 2 can be installed on the enclosure’s exterior with the included extension cable.

Differentiated Design Differentiated from typical U-shaped heatpipe coolers, a central band of blue anodized fins adds a sleek and cool aesthetic finish.

High Performance Super Thermal Grease ZM-STG2 The included all new high performance thermal grease ZM-STG2 maximizes heat transfer from the CPU to the base of CNPS10X Quiet for intensified cooling performance

Versatile Compatibility CNPS10X Quiet accommodates a broad range of sockets. Intel LGA1156/1366/775, AMD AM3/AM2+/AM2/754/939/940

Common Components CNPS10X Extreme & PWM Mate Thermal Grease (ZM-STG2) FAN MATE 2 Double-Sided Tape FAN MATE 2 Cable Washers User’s Manual

Components for Intel Socket 1156/775 Socket 1156/775 Clip Socket 1156/775 Clip Support Socket 775 Backplate Socket 1156 Nuts Socket 1156/775 Bolts (Silver)

Components for Intel Socket 1366 Socket 1366 Clip Socket 1366 Clip Support Socket 1366 Bolts (Gold)

Components for AMD Socket AM3/AM2+/AM2/754/939/940 AMD Clip

Cautionary Notes:

• Use and keep product away from reach of children and pets.
• Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention.
• To prevent possible injuries, gloves must be worn while handling this product.
• Excessive force exerted on the fan may cause damage to the fan and/or system.
• Avoid inserting objects into the fan while it is in operation.
• Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
• Zalman is not responsible for any damages caused by overclocking.
• During transportation of the system, the cooler must be removed.
• Zalman is not responsible for any damages that occur during the transport of a system.
• Product design and specifications may be revised to improve quality and performance.